miniature painting tutorials
-
Painting Faces
-
- Published: 29-09-2014, 10:07 pm
- 7 comments
Painting Faces
You can never have too many tutorials on how to paint faces, right? Well, hopefully because here's another one... This is my general approach to painting human faces. The main example is a 54mm figure but I use the same ideas on 28mm and 75 or 90mm figures. The difference with going up or down in scale is the level of detail we can reasonably expect to achieve. If you're painting a smaller figure don't worry about putting as much detail into the eyes. For the face focus on the main shapes/feat... -
-
GoreRot SBS (Caution Pic Heavy!)
-
- Published: 22-05-2014, 01:41 pm
- 0 comments
GoreRot SBS (Caution Pic Heavy!)
Hello once again! It has been some time since my last step by step. Last winter I painted up a great little miniature from Mannequin Miniatures, a goblin assassin named Gorerot. Here is a detailed step by step of how I painted him up. I initially began with a gray primer and took a photo with a single bright light directly overhead and very close to the miniature to give myself a reference on where to place shadows and highlights: Skin, Eyes and Nails: I wanted to go with something a bit d... -
-
Painting a 54mm Historical Figure - Greek Hoplite
-
- Published: 18-03-2014, 02:06 am
- 5 comments
Painting a 54mm Historical Figure - Greek Hoplite
This article will cover the painting of a 54mm Greek Hoplite from Romeo Models. I’ll be working with acrylic paint, primarily Reaper Master Series (RMS) although I also use some Vallejo Model Air (VMA), GW, and Andrea as well. One thing that attracts me to figures from the ancient and medieval time periods is that they can work for both historical and fantasy painters. You can do you your research and be as historically accurate as possible or let your imagination run, pair a medieval knight with... -
-
How to create an earth base using Vallejo paste
-
- Published: 06-11-2013, 01:50 pm
- 5037 views
- 2 comments
How to create an earth base using Vallejo paste
A nice, fast and easy way to create an earth base for your miniature using Vallejo paste.
The Vallejo paste which I am using is a mixture of pumice stone and acrylic resin.
The colors I used for this tutorial were calthan brown and bleached bone from Games Workshop.
... -
-
Ambush - Infamy diorama - SBS
-
- Published: 09-09-2013, 02:53 pm
- 12726 views
- 4 comments
Ambush - Infamy diorama - SBS
As soon as the competition was announced and I read James' stipulations on winning the event, I started thinking about what to do. From Infamy range I had Holmes, Watson, Henrietta and Frank so I decided to use them all in a diorama. Knowing that Infamy is about to become a skirmish game, I also wanted to make my minis playable later on so I had to devise a way of inserting the minis into the diorama without it looking too obvious. When approaching such a project, I always start from a sketch, r... -
-
Freehand Painting - Step by Step
-
- Published: 16-05-2013, 03:02 pm
- 5 comments
Freehand Painting - Step by Step
One of the things I love to add to my figures is a design or pattern, something unique to make it stand out from the many other versions you may see around the web. This can take the form of a small detail like a line or pattern on a piece of clothing, an emblem on a shield or flag, or something much more complex. Painting designs on your figure can really be as simple or as complicated as you'd like. I recommend starting small with simple designs and then working your way up to more ... -
-
Painting Skin Tones
-
- Published: 06-05-2013, 02:44 pm
- 7 comments
Painting Skin Tones
Painting skin on your models can be tricky and, at times, quite frustrating. But once you get a handle on it, it's actually a lot of fun and gives you plenty of room to experiment. My goal in this tutorial is to share my general approach to painting skin and give you a number of mixes and corresponding figure examples. When it comes to paints there are a lot of good choices (GW, Vallejo, P3, etc). However for this tutorial I'm mostly using Reaper Master Series. I like these because (a)... -
-
Arwen - Painting a Golden Demon Finalist - Step By Step
-
- Published: 24-11-2012, 02:21 pm
- 8328 views
- 1 comment
Arwen - Painting a Golden Demon Finalist - Step By Step
Introduction Arwen is a model I painted this year and entered into GD Germany and UK. She got a finalist in both competitions. In this step by step tutorial I’ll cover everything from prep, basing and painting of both the model and base. I’m always happy to answer questions, so feel free to drop me a line/catch me at a show (if you don’t know me as Chameleon some of you may know me as Sue Rigby/Griffin). First off, apologies for the background/workspace and the flitting betwee... -
-
Weathering Tutorial
-
- Published: 11-09-2012, 07:51 pm
- 8 comments
Weathering Tutorial
Since I was unable to complete the weathering session at the recent Wamp event I was asked if I could translate my plans into a tutorial. Happily I excepted the offer and here it is. From a weathering perspective I like to build things up step by step in the same way as they would happen in real life. For example, the first step would be for any paint on top of the base coat to chip off leaving the under lying colour showing through. Then in the weathering process undercoat would show up, followe... -
-
Step-By-Step: TrueMetallicMetal (TMM)
-
- Published: 27-07-2012, 03:39 pm
- 14 comments
Step-By-Step: TrueMetallicMetal (TMM)
I hope this is the right section to post this. :) Since I had to do the backside of my Troll's axe at the end I thought I might give it a try and take some step-by-step pictures of my painting. Unfortunately some pictures turned out quite blurry but I hope that the progress is still recognizable during the different steps. I used P3 colors for the shadows on his silver TMM parts and I guess some of you won't have them at home so here's a shot of the P3 colors I used (in order to find some fitt... -
There are no articles in this category.
Please log in to your account to view your subscribed posts.
Categories
Collapse
Latest Articles
Collapse
-
In this Hotseat we sit down and chat with thee guys from Demented Games, the Australian company behind the wonderful Twisted game.
Seb, Its almost 11 years to the day we sat you down in the hotseat. Back then there was no Guild of Harmony or Twisted. So how did things pan out in that time to bring you to where you are now? (Read Sebs original interview here: Seb Archer )
(Seb) Wow 11 years - yes, things have certainly changed a lot in that time! Last time...-
Channel: Wamp
27-08-2021, 03:07 pm -
-
Anyone that has received a resin miniature from Warploque Miniatures will know, from the title, that this is a very unfair comparison to put together. There are two casters that I would recommend above all others in the UK – BrokenToad, and Rob Huntley of Warploque Miniatures - I've never had a bad or mediocre cast from either. Nevertheless, I got my hands on my first 3D printed miniatures recently and as they’re from Warploque via their Digital Workshop, it’s a comparison I’m going to make....
-
Channel: Wamp Reviews
28-03-2021, 08:18 pm -
-
Welcome to this review of She-Hulk from Atomic Mass Games! It is my first review for a while (or at least my first review longer than an Instagram snippet) so I'm a little rusty and may well get carried away and ramble in places – apologies in advance.
At the time of writing, She-Hulk is the latest release from Atomic Mass Games for their Marvel: Crisis Protocol tabletop skirmish game. The great thing about The Crisis Protocol kits is that they’re all uniformly...-
Channel: Wamp Reviews
02-03-2021, 10:35 pm -
-
Introduction FeR miniatures is becoming one of the go-to sites for larger scale miniatures in recent times, developing a reputation for producing stunning busts and figures, and collaborating with sculptors such as Raffaele Picca and David Zabrocki. It is run by the equally talented painter Fernando Ruiz, who in fact painted the box art for the kit we're looking at here. Chances are that if you've seen a historical figure/bust on Facebook or Putty & Paint over the last 12 months, it's from this ...
-
Channel: Wamp Reviews
31-10-2016, 09:16 am -
-
Dark Art Studios turns 12 at the end of the year we manage to catch a few words with Byron about the new Vengeance Miniatures range and the new Table Top game from Dark Art – Arena of Doom.
Hey Byron, please tell us about Vengeance Miniatures?
The new miniature range is 35mm heroic scale and will be made using traditional techniques out of an alloy metal which is our own formula.
How did the name come about? Vengeance Miniatures ...-
Channel: Other Articles
19-10-2015, 08:15 am -
-
Sometimes reviews are just hard to write. Often it’s because what you’re reviewing is hard to define within the scope you’re used to working in; it’s something new, a deviation. But what could be more straight forward than reviewing paints? I’ve done it before, after all. So why was a review so difficult to write? Part of the reason is that, as far as my research has shown, these paints are manufactured by the same company that makes Privateer Press’ P3 line of paints. They’re even in the same...
-
Channel: Wamp Reviews
12-05-2015, 07:20 pm -