Sign Up Now FAQ
Signup Now
Come on sign up, you know you want to. It's free and easy and you get to be even more awesome!
  • Painting Stand by Exile

    I had a few questions about my stands and as I had enough bits to make one I have done this tutorial

    the pictures tell it mostly but a few word to help
    1. The fitting is from B&Q (a cabinet joint) and the washer also, you can use anything as the body but I have loads of empty GW pots
    2.& 3. fist thing to note is these pegs on the fitting if you want to use it for GW style tabs as well as pins you need to cut half the peg off to give the room for the tag to sit
    4. N.B only stick ONE side of the fitting or you will be in trouble, the washer is so when you have a bigger figure on the stand it does not get top heavy
    5. Finished article.
    Comments 3 Comments
    1. Terrain tight wad's Avatar
      Terrain tight wad -
      Very handy Exile I can see room in the toolbox for a few of these thanks.
    1. exilesjjb's Avatar
      exilesjjb -
      your welcome :)
    1. Ulfgrimr's Avatar
      Ulfgrimr -
      Excellent idea Exiles and seems far better than sticking pins in corks, many thanks.